Printing treatment summary report, Treatment summary report – ZOLL X Series Monitor Defibrillator Rev H User Manual
Page 241
Treatment Summary Report
9650-001355-01 Rev. H
X Series Operator’s Guide
21–3
Note:
If you attempt to print a snapshot before the unit has finished storing the snapshot in
the log, a NO DATA AVAILABLE message is printed. To print the snapshot correctly,
wait until the snapshot is complete, then select and print it again.
Treatment Summary Report
The Treatment Summary Report is a report that shows all of the treatment events related to a
patient such as defibrillation/pacer events, alarm events, and treatment snapshots. It is helpful
to print out this report at the end of a case.
Printing Treatment Summary Report
To print a treatment summary report, do the following:
1. Press the More quick access key (
).
2.
Press the Log quick access key (
).
3.
Press the Treatment Summary quick access key (
). The Treatment Summary window
displays.
4.
Use the navigation keys to highlight and select the treatment summary you want to print.
Note:
The Treatment Summary Report that you selected has a check mark next to it.
5.
Use the navigation keys to highlight and select Print Treatment Summary.
TREATMENT SUMARY REPORT
Name: Phillip Davies
06:06:14
New Case ID
ID: Patient 0015
Patient Mode: Adult
06:06:14
System On
Start Time:
06/06/11
06:06:14
06:06:14
Patient Mode Adult
Last Event:
06/06/11
09:43:40
06:06:14
Some Alarm Limits Disabled
Elapsed Time: 00:29:48
# Events:
06:06:20
Self Test Passed
Total Shocks: 1
06:06:43
Treatment Snapshot: ASA
Total Pace Time:
00:00:00
Total 12 Leads:
0
Dept: ICU
Unit:
S/N: 0
SW: 00.00.00.00
LOG