ZOLL X Series Monitor Defibrillator Rev H - Manual (Page 48)

C HAPTER 2 P RODUCT O VERVIEW
2–8 www.zoll.com 9650-001355-01 Rev. H
Multifunction Cable (MFC)
The unit ships with an MFC that is used to defibrillate the patient. Any other cables that ship
with your unit depend on the options you have purchased.
Figure 2-5. MFC
Inserting MFC into Unit
Plug the MFC connector into the therapy input connector on the right side of the unit. Push the
connector in with the arrows aligned. The connector will click when it locks into place.
Connector Description
ECG For connecting 3- or 5-lead ECG cable (12-lead monitoring is
optional).
SpO
2
For connecting Masimo SpO
2
/CO cable.
NIBP For connecting NIBP hose.
CO
2
For connecting CO
2
sampling line.
Temp For connecting temperature probe(s).
Multifunction Cable (MFC) For connecting paddles or ZOLL hands-free therapy and pacing
electrodes.
USB For connecting the X Series defibrillator to a USB device.
IBP For connecting IBP cable(s).
2. Connector is locked
into place. 1. Insert MFC into unit.