ZOLL X Series Monitor Defibrillator Rev H - Manual (Page 246)

C HAPTER 22 W IRELESS C OMMUNICATIONS
22–2 www.zoll.com 9650-001355-01 Rev. H
The Wireless Icon
The wireless icon is located to the right of the patient mode in the display screen. It has three
possible states shown the table below. If wireless connectivity is disabled, no icon is displayed.
You can select the Wireless icon to:
• Access the Wireless menu.
• View preconfigured WiFi access points, connection details, paired devices or distribution
lists.
• Set up a temporary WiFi access point or Bluetooth connection.
Use the navigation keys to select the wireless icon.
State Description
Connected Wireless connectivity is active using WiFi, Bluetooth, or USB cellular
modem. For Wifi, this is the normal operating state. For Bluetooth or
cellular modem, this icon appears only when a transmission is
requested.
Not connected Wireless connectivity is inactive. If a WiFi access point is selected, this
icon indicates the selected network cannot connect due to incorrect
configuration or weak/no signal strength. If the unit is configured to use
Bluetooth or cellular modem, the unit will show this icon until a
transmission is requested.
Failed Wireless communication hardware has failed.
No icon All wireless connectivity is disabled.
Wireless icon