Setting up an ethernet connection – ZOLL X Series Monitor Defibrillator Rev H User Manual
Page 266
Advertising
C
HAPTER
22
W
IRELESS
C
OMMUNICATIONS
22–22
www.zoll.com
9650-001355-01 Rev. H
Setting up an Ethernet Connection
(Reserved for future use)
The X Series software does not currently support the use of USB-Ethernet adapters. The
X Series software will support the use of USB-Ethernet adapters in a future release.
An Ethernet adapter can be used for transmission instead of wireless communications. In the
Communications menu, select Ethernet Configure.
Use the navigation keys to select either DHCP or Static IP. If you select Static IP, use the
numeric keypad to enter values for the IP Address, Subnet Mask, Default Gateway, Preferred
DNS Server, and Alternate DNS Server.
Advertising