Printing reports – ZOLL X Series Monitor Defibrillator Rev H User Manual
Page 273
Printing Patient Data
9650-001355-01 Rev. H
X Series Operator’s Guide
23–3
The SpO
2
Plethysmograph
The SpO
2
plethysmograph is printed with major divisions (vertical dotted lines) every 5 mm.
CO
2
Waveform
CO
2
waveforms are printed on a grid with major divisions (vertical dotted lines) every 5 mm,
and the pressure scale grids are printed horizontally.
RESP Waveform
Respiration waveforms are printed with major divisions (vertical dotted lines) every 5 mm.
Printing Reports
Print on Snapshot
Prints snapshot, including numerics and waveform each time a snapshot is acquired.
Print on Patient Alarm
You can print a report each time an alarm occurs. This report is called the Print on Patient
Alarm Report. The Print on Patient Alarm setting must be turned on in the Setup>Print
window.
Print on NIBP
You can print the results of an NIBP measurement each time one occurs. This report is called
the NIBP Ticket Report. The Print on NIBP setting must be turned on in the Setup>Print
window.
Print on Trend
Prints numeric trend values each time a trend data snapshot is taken.
Printing Treatment Summary Report
To print a treatment summary report, do the following:
1. Press the More quick access key (
).
2.
Press the Log quick access key (
).
3.
Press the Treatment Summary quick access key (
). The Treatment Summary window
displays.
4.
Use the navigation keys to highlight and select the treatment summary you want to print.
Note:
The Treatment Summary Report that you selected has a check mark next to it.
5.
Use the navigation keys to highlight and select Print Treatment Summary.
LOG