Yokogawa Value Series FX1000 - Manual (Page 133)

3-51
IM 04L21B01-17EN
Commands
1
2
3
4
5
6
App
Index
MO Manages and outputs the data
that has been written to internal
memory
Syntax MO p1,p2,p3<terminator>
p1 Type of operation
DIR Data list output
GET Data output
SIZE Data size output
p2 Output data type
MANUAL Manual sampled data
REPORT Report
p3 File name
Example Output report data file
000142_080102_004127H_.DAR from the FX.
MOGET,REPORT,
000142_080102_004127H_.DAR
Description Parameter p3 is valid when p1 is set to GET or
SIZE.
3.9 Output Commands (RS-
422A/485 commands)
ESC O Opens an instrument
ESC is 1BH in ASCII code. For details, see
appendix 3.
Syntax ESC O p1<terminator>
p1 Instrument address (01 to 99)
Example Open the instrument at address 99, and enable
all commands.
ESC O99
Description • Specify the address of the instrument that you
want to communicate with.
• You can only open one instrument at any
given time.
• If you execute ESC O, any instrument that is
already open is automatically closed.
• When the FX receives this command
successfully, it returns “ ESC O(instrument
address).”
• Normally, you can use CR+LF or LF as the
terminator for communication commands.
However, you must terminate this command
with CR+LF.
ESC C Closes an instrument
ESC is 1BH in ASCII code. For details, see
appendix 3.
Syntax ESC C p1<terminator>
p1 Instrument address (01 to 99)
Example Close the instrument at address 77.
ESC C77
Description • This command closes the connection to the
instrument you are communicating with.
• When the FX receives this command
successfully, it returns “ ESC C(instrument
address).”
• Normally, you can use CR+LF or LF as the
terminator for communication commands.
However, you must terminate this command
with CR+LF.
3.8 Output Commands/3.9 Output Commands