Yokogawa Value Series FX1000 - Manual (Page 19)

1-11
IM 04L21B01-17EN
Using the Ethernet Interface (/C7 Option)
1
2
3
4
5
6
App
Index
1.3 Connecting the FX
Connecting to the Port
Connector
Connect an Ethernet cable to the Ethernet port on the FX rear panel.
Ethernet cable
Do not connect an Ethernet cable
whose plug does not comply with
FCC specifications. If you do, the
FX may malfunction.
CAUTION
Connecting to the PC
Make the connection via a hub. For a one-to-one connection with a PC, make the
connection as shown in the figure below. Multiple FXs can be connected to a single PC
in a similar manner.
Hub
FX
Ethernet cable
PC