Yokogawa Value Series FX1000 - Manual (Page 35)

1-27
IM 04L21B01-17EN
Using the Ethernet Interface (/C7 Option)
1
2
3
4
5
6
App
Index
1.5 Monitoring the FX on a PC Browser
Setting the Web Server Function
From the basic setting mode menu, set the server function and Web page of
Communication (Ethernet).
Setting the Web server
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Communication (Ethernet) > Server >
Server modes.
• Web
For the Web item under Server, select Use or Not (don’t use). When Use is selected,
the Web page item is added to the basic setting mode menu.
Port Number
The default value is 80. To change the setting,
◊ Press
MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > Communication > Service port.
For the selectable range of port numbers, see section 6.1.
Setting the Web page
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Communication (Ethernet) > Web page.