Yokogawa Value Series FX1000 - Manual (Page 193)

App-3
IM 04L21B01-17EN
Appendix
1
2
3
4
5
6
App
Index
Appendix 2 Login Procedure
You log into the FX from your PC to use the functionality of the setting/measurement
server and the maintenance/test server via the Ethernet interface. If you complete the
procedure successfully up to login complete in the following figure, the commands in
chapter 3 become functional.
When Using the Login Function (Standard Security Function) of the FX
E1 403
E1 403
Yes
No
No
No
No No
No
E1 404
E1 421
Connect
Disconnect
E1 422
Disconnect
E1 420
Disconnect Login complete
Within 3 retries? 2
Within 3 retries? 3
Wait 5 s
E1 401
E0
E1 400
Entered “quit”?
Verification match?
Within the number of
simultaneous uses? 3
Within 2 minutes?
Within the number
of connections? 1
Within 2 minutes?
User name
Password
Increment retry count
1
1
1
1
End
Start Judge
Transit
Code (for a description of codes and messages, see the FX1000 User’s Manual,
IM 04L21B01-01EN)
Response from the FX (message omitted)
For a description of the response format, see section 4.1.
User entry
1: Connections cannot exceed the maximum number of connections (see section 6.1).
2: If you try to log in using a wrong password four consecutive times, the communication is
dropped (the number of retries for login is three).
3: If you try to log in causing the number of simultaneous uses at the administrator or user level
to be exceeded (see section 6.1) four consecutive times, the communication is dropped (even
if the password is correct).