Yokogawa Value Series FX1000 - Manual (Page 93)

3-11
IM 04L21B01-17EN
Commands
1
2
3
4
5
6
App
Index
List of Notations Such as Channel Numbers and Valid Ranges
Type Notation and Valid
Range
Notes
Measurement channel 001 to 012 Varies depending on the model
Computation channel 101 to 112 High-speed input model, /M1, /PM1, and /PWR1
101 to 124 Medium-speed input model, /M1, /PM1, and /PWR1
Report channels R01 to R12 High-speed input model, /M1, /PM1, and /PWR1
R01 to R24 Medium-speed input model, /M1, /PM1, and /PWR1
Internal switches S01 to S30
Output relays I01 to I06, I11 to I16 Varies depending on the option (/A[ ] or /A4A)
Constants K01 to K60 /M1, /PM1, /PWR1
Communication input
data
C01 to C24 /M1, /PM1, /PWR1
Display groups 1 to 10
Remote control
terminals
1 to 8 /R1, /PM1
Pulse inputs 1 to 8 /PM1
Flags 1 to 8 /M1, /PM1, /PWR1
Timers 1 to 4
Match time timers 1 to 4
Report groups
(stacked bar graphs)
1 to 2 High-speed input model, /M1, /PM1, and /PWR1
1 to 4 Medium-speed input model, /M1, /PM1, and /PWR1
High-speed input models FX1002 and FX1004
Medium-speed input models FX1006, FX1008, FX1010, and FX1012
Note
Regarding “Don’t care” parameters for each command
“Don’t care” parameters do not affect the settings that are made by a command. Set these
parameters to any values that you want.
Examples: ,abc,
When “abc” is entered.
,1, When 1 is entered.
,, When nothing is entered.
, , When a space is entered.
3.3 Setup Parameters