Yokogawa Value Series FX1000 - Manual (Page 88)

3-6
IM 04L21B01-17EN
Control Commands
Command
Name
Function Execution Mode Administrator User Page
BT Sets a batch name Operation mode Yes No 3-30
BU Sets a batch comment Operation mode Yes No 3-30
UD Switches the screen Operation mode Yes No 3-30
PS Starts or stops recording Operation mode Yes No 3-30
AK Clears alarm output (acknowledges alarms) Operation mode Yes No 3-30
EV Executes manual sample, generates a manual trigger, takes a
snapshot, or causes a timeout
Operation mode Yes No 3-31
CL Executes manual SNTP (/C7 option) Operation mode Yes No 3-31
CV Switches between the normal and secondary trend intervals Operation mode Yes No 3-31
MS Writes a message (display and write) Operation mode Yes No 3-31
BJ Writes a free message Operation mode Yes No 3-31
EJ Changes the password of the login function (/C7 option) Operation mode Yes Yes 3-31
TL Starts, stops, resets computation (MATH) or clears the computation
dropout status display (/M1, /PM1, and /PWR1 options)
Operation mode Yes No 3-31
DS Switches between execution modes (operation and basic setting) All modes Yes No 3-31
LO Loads setup data for setting mode Operation mode Yes No 3-32
LI Saves setup data (/C7 option) Operation mode Yes No 3-32
CM Sets communication input data (/M1, /PM1, and /PWR1 options) Operation mode Yes No 3-32
EM Starts or stops the e-mail transmission function (/C7 option) Operation mode Yes No 3-32
CU Recovers Modbus manually (/C2, /C3, and /C7 options) Operation mode Yes No 3-33
YO Loads a setup file that includes the settings for basic setting mode Basic setting
mode
Yes No 3-33
YC Clears measured and computed data and initializes setup data Basic setting
mode
Yes No 3-33
IR Resets a relative timer Operation mode Yes No 3-33
BV Enters a string (can only be used during serial communication) All modes Yes No 3-33
KE Performs key operations Operation mode Yes No 3-33
3.2 List of Commands