Yokogawa Value Series FX1000 - Manual (Page 20)

1-12
IM 04L21B01-17EN
Setting the IP Address Host Information and DNS
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) > IP
address.
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) >
Host settings.
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication (Ethernet) > DNS
settings.
IP address setting Host information setting
DNS setting
Set the IP address to a fixed IP address or obtain it automatically (DHCP).
Consult with your network administrator for the network parameters such as the IP
address, subnet mask, default gateway, and DNS.
1.3 Connecting the FX