Yokogawa Value Series FX1000 - Manual (Page 21)

1-13
IM 04L21B01-17EN
Using the Ethernet Interface (/C7 Option)
1
2
3
4
5
6
App
Index
When using a fixed IP address
• DHCP
Set DHCP to Not.
• IP address
Set the IP address to assign to the FX.
• Subnet mask
Set the subnet mask according to the system or network to which the FX belongs.
• Default gateway
Set the IP address of the gateway.
• Host name
Set the FX’s host name using up to 64 alphanumeric characters. You do not have to
set this parameter.
• Domain name
Set the network domain name that the FX belongs to using up to 64 characters. You
do not have to set this parameter.
• Server search order
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain suffix search order
Set up to two domain suffixes: primary and secondary.
When obtaining the IP address from DHCP
• DHCP
Set DHCP to Use.
• DNS accession
To automatically obtain the DNS server address, select Use. Otherwise, select Not. If
you select Not, you must set the server search order.
• Host-name register
To automatically register the host name to the DNS server, select Use.
• Host name
Set the FX’s host name using up to 64 alphanumeric characters.
• Domain name
Set the network domain name that the FX belongs to using up to 64 characters.
This is enabled when
DNS accession is set to Not.
• Server search order (not necessary when DNS accession is enabled)
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain suffix search order
Set up to two domain suffixes: primary and secondary.
1.3 Connecting the FX