HID FARGO HDPii User Guide - Manual (Page 105)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
105
Telnet Command Command Purpose Command Format
help
commands.
reset
Reset the Ethernet interface
for the HDPii
Printer/encoder.
reset
ping
Send a ping command to
another IP address as a test
of the Ethernet interface. ping <IPADDR>
Telnet Command Command Purpose Command Format
list all Display all information about
this Printer.
list all
diff Display all differences
between current and stored
network settings.
list diff
uptime Display how long since the
interface was last reset. list uptime
sysinfo Display information about
the Printer (i.e., label,
contact, location, Firmware
version and date, and serial
number).
list sysinfo
Ribbon Display information about
the installed Ribbon in the
Printer.
list Ribbon
net Display information about
the current network settings
of the Ethernet interface.
list net
stored net Display information about
the stored network settings
of the Ethernet interface.
list stored net
default net Display information about
the default network settings
of the Ethernet interface.
list default net
user Display information about
the defined User names and
their type (root or guest
privileges).
list user