Selecting the test print button – HID FARGO HDPii User Guide User Manual

Page 170

Text mode
Original mode

Advertising

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4

170

Selecting the Test Print button

When selected, a test PRN file will be sent to the Printer. See below. This file will print a Full
Color plus Resin print on the front side of the card and a Resin or black only image on the
backside. This image is the same as what is supplied in the Printer’s Supply Pack.
•

For YMCK, the PRN file is full color and resin on front only.

•

For YMCKK, the PRN file is full color front with resin on front and then the back is resin.

•

For YMC, the PRN file is full color and front only

•

For YMCKH, the PRN file is full color with resin and front only.

•

For YMCKI, the PRN file is full color, with resin, and with an inhibit area on the front only.

Advertising