HID FARGO HDPii User Guide - Manual (Page 235)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
235
Section 8: Using the Inhibit Panel (HDPii)
The Inhibit Panel (I designation under YMCKI allows definition of areas on the surface of the
card that will prevent the transfer of film to the card surface.
• When Active: This feature is active when using the Ribbons (I designation under
YMCKI).
• Two Approaches: You can either use the Fargo Workbench Printer Utility or an
approved application to access and work with the Inhibit Panel.
Using Inhibit Panel (via the Fargo Workbench Printer Utility)
You can use the Fargo Workbench Printer Utility to generate an Inhibit Panel Layout. (Note:
This utility allows the operator to add a rectangular area(s) defining which areas are to be
inhibited.)
• Inhibit Panel Placement: Each print job (generated from that individual client
workstation) will generate the instructions within the print job that place the corresponding
area(s) on the I-panel.
• Operating Systems: This method works on all applications generating print jobs to the
HDPii under all operating systems. (Note: This is regardless of whether the printer (being
used) is a shared instance from another workstation or an instance local to that particular
workstation.)