HID FARGO HDPii User Guide - Manual (Page 209)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
209
Category Description
Magnetic
Encoding
options Change the encoding mode and coercivity setting or modify the ISO
standards for tracks 1, 2 and 3, by correctly modifying these Magnetic
Encoding options.
ISO
Encoding If you select ISO Encoding, you send down a formatted set of characters.
(Note: This selection activates the track tabs. However, all functions on
the Track tabs are inactive/gray and display ISO defaults, which are the
defaults listed for each track below. The Shift Data Left check box
remains unchecked and inactive.)
Custom
Encoding
selection
(active and
inactive
functions) If you select Custom Encoding, all options are active. The Default is
ISO Encoding. (Note: The defaults are the same as the ISO Encoding
defaults. However, all functions on the Magnetic Track Options tabs are
active.)