HID FARGO HDPii User Guide - Manual (Page 68)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
68
Section 5: General Troubleshooting
The purpose of this section is to provide the User with specific procedures relating to the
LCD Messages, Communication Errors, Card Feeding Errors, Encoding Errors, Printing
Process Errors, Transfer Process Errors and Diagnosing the Image Problems for the HDPii.
Important! Fargo Card Printers require highly specialized print Ribbons to function properly.
To maximize Printer life, reliability, printed card quality and durability, you must use only
Fargo Certified Supplies. For this reason, your Fargo warranty is void, where not prohibited
by law, if you use non-Fargo Certified Supplies. To order additional materials, please contact
your authorized reseller.
LCD Messages
The LCD display shows the current status of the Printer. Refer to the cause and solution
tables in this section for all possible LCD messages. (Note: These tables display the LCD
messages in alphabetical order. If the LCD message is communicating an error or requires
an action, these tables will also offer a solution to what should be done.)
Safety Messages (review carefully)
Symbol Critical Instructions for Safety purposes
Danger: Failure to follow these installation guidelines can result in
death or serious injury.
Information that raises potential safety issues is indicated by a
warning symbol (as shown to the left).
• To prevent personal injury, refer to the following safety
messages before performing an operation preceded by this
symbol.
• To prevent personal injury, always remove the power cord
prior to performing repair procedures, unless otherwise
specified.