HID FARGO HDPii User Guide User Manual
Page 202
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
202
Step Procedure
3
Return to the factory default settings for the selected Card Type by clicking
on the Default button. If using cards (that differ from the Card Type Glossy-
PVC or Matte-PVC options), select one of the Card Type Custom options.
4
Adjust the dwell time and temperature settings to ensure proper image
transfer. Determine the appropriate settings for the card stock by setting the
Transfer Dwell Time
and Transfer Temperature to the default settings.
Print a card.
• If the HDP Film is not transferring properly, adjust these settings
accordingly.
OR
• If the Film is transferring properly, perform a final durability test called the
Tape Test
.
For instructions on how to do a tape test, see the Conducting the Tape
Adhesion Test
procedure below.xxx