HID FARGO HDPii User Guide - Manual (Page 107)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
107
Telnet Command Command Purpose Command Format
settings from the default or
current settings. default|current
set user add Add a new User definition.
The HDPii allows only two
(2) User definitions.
set user add <NAME>
del Delete a User definition. set user del <NAME>
passwd Define a new password for a
User. set user passwd <NAME>
[<PASSWORD>]
type Specify a User as root or
guest.
Only root Users have
administrative rights to
change network interface
settings.
set user type <NAME>
root|guest
from Restore User setting from
default or stored settings.
set user from
default|stored
store net addr Store a new IP address. store net addr
<ADDRESS>
mask Store a new address mask. store net mask <MASK>
gateway Store a new default gateway. store net gateway
<ADDRESS>
dns Store a new DNS server
address. store net dns <ADDRESS>
domain Store a new DNS domain
suffix. store net domain
<STRING>
opts Enable or disable automatic
address assignment using
DHCP. Static (non-
automatic) addresses will
come from the stored or
default settings, depending
on the other settings. To enable automatic
address assignment:
store net opts dhcp
To disable automatic
address assignment:
store net opts -dhcp
from Restore the network settings
from either the default
settings or the current store net from
default|current