Section 10: cleaning, Using the required supplies – HID FARGO HDPii User Guide User Manual

Page 278

Advertising
background image

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4

278

Section 10: Cleaning

HDPii Cleaning Kit part number is 089200. For more detailed instruction, please refer to the
Cleaning Kit Instruction Sheet in the kit.

Important:

The Printer should be cleaned on a regular basis to ensure that the Printer

consistently produces high quality output.

Danger: Be sure to disconnect the Printer's power cord whenever performing any

type of maintenance procedure unless otherwise directed.

Important:

Fargo Card Printers require highly specialized Print Ribbons to function properly.

To maximize Printer life, reliability, printed card quality and durability, you must use only
Fargo Certified Supplies. For this reason, your Fargo warranty is void, where not prohibited
by law, if you use non-Fargo Certified Supplies. To order additional materials, please contact
your authorized reseller.

Using the Required Supplies

For the maintenance procedures outlined for the Printer, you will need a Printer Cleaning Kit,
available from the reseller. This optional kit includes the following:
Printhead Cleaning Swabs pre-moistened with 99.99% isopropyl alcohol for cleaning

the Printer's Printhead.

Cleaning Cards with an adhesive backing for cleaning the Printer's Cleaning Rollers.
Gauze Pads pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer's

interior and exterior.

Alcohol Cards pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer's

Platen Rollers, Card Feed Rollers.

Advertising