HID FARGO HDPii User Guide User Manual
Page 194
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
194
• Contrast (Default, 0%): Move the slide to the left for (-) or less contrast.
Move the slide to the right (+) or more contrast of the printed image.
Study the image (on the right) to determine correct contrast.
• Gamma (Default, 0%): Move the slide to the left for (-) or less gamma.
Move the slide to the right (+) or more gamma of the printed image. Study
the image (on the right) to determine correct gamma.
Step Procedure
3
For the Balance slider bar controls, see below.
• Click
OK
to accept any variance from the default (for this specific slider
bar) and return to the Image Color tab window.
• Click
Cancel
to negate any variance on the slide and return to the Image
Color tab window.
• Click
on
the
Default
button to clear changes back to the default settings
for this window only.
In addition, here are further instructions:
•
Yellow Balance (Default, 0%):
Move the slide to the left for (-) or less
yellow as an individual color. Move the slide to the right (+) or more