Using the configuration tab, Using the optional printer features group box, Using the event monitoring group box – HID FARGO HDPii User Guide User Manual

Page 249

Advertising
background image

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4

249

Using the Configuration Tab

Using the Optional Printer Features Group Box

The Default setting is checked.
• If checked, upon Configuration tab activation, the Driver retrieves the installed Printer

features information from the Firmware and automatically checks the appropriate check
boxes for Dual Sided and Magnetic Encoder.

• If checked, the Dual Sided and Magnetic Encoder checkboxes are read only.
• If checked and no Printer is found or bi-directional capabilities are disabled or unavailable,

the error message (shown below) is displayed.

• If unchecked or cleared, feature check boxes become active and can be manually set.
• If the Driver is reinstalled, it resets to the default of checked.

Using the Event Monitoring Group Box

This Event Monitoring group box displays the Low Supplies (Ribbon and Film).

• The default setting is checked. If checked, the Ribbon Low message box is displayed

with every print job when Printer reports low Ribbon to the driver.

Advertising