Specifying tcp event logging – HID FARGO HDPii User Guide User Manual
Page 133
Advertising
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
133
choices are log1 or log2).
3
Select the UDP Syslog radio button.
4
Enter a valid IP address or domain name.
5
Select Submit.
6
Login as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
Specifying TCP Event Logging
Follow this procedure to send logging messages to a pre-existing IP connection made on the
TCP port.
Step
Procedure
1 Select the System Log link.
Advertising