Loading the blank cards – HID FARGO HDPii User Guide User Manual
Page 48
Advertising
![background image](/manuals/433176/48/background.png)
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
48
Loading the Blank Cards
Step Procedure
1
Load the blank cards into the Card Cartridge, as shown below.
Important: The front of the card must face DOWN. The back of the card
or the magnetic stripe on the card must face UP. The Smart Chip is
loaded on the bottom.
2
Place the Card Input Cartridge onto the Printer until it clicks.
Advertising