Choosing a good location – HID FARGO HDPii User Guide User Manual
Page 37
Advertising
![background image](/manuals/433176/37/background.png)
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
37
Choosing a Good Location
Follow these guidelines:
• Place the unit in a location with adequate air circulation to prevent internal heat build-up.
• Use the Printer's dimensions as a guideline for the minimum clearances to the unit.
(Note: Allow for adequate clearance above the unit to accommodate the height of the
unit with its Covers open.)
• Do not install unit near heat sources such as radiators or air ducts or in a place subject to
direct sunlight, excessive dust, mechanical vibration or shock.
Advertising