HID FARGO HDPii User Guide - Manual (Page 91)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
91
4) Open the program and type: “This is a Test.” Then, go to File on
the menu bar and select Print.
5 Determine whether there is adequate hard Drive space.
(Note: A large volume of temporary files on the computer can cause
communications errors.)
a. Access the temporary files by following this process:
• Search for all folders called TEMP. Once found, clear out the
contents of the folders.
• Use a disk cleanup utility (such as Disk Cleanup found in the
System Tools folder of the Start menu) or use a third party
application.
Printing a Test Image
Step Procedure
1 Open the Diagnostic Tool from the Driver. Choose Run Tests to select a
preset test image. Select Self Tests. See Displays A and B, below. (Note:
These images help to determine if the Printer is functioning properly.)
2 Scroll to the desired Self Test image from the Choose Test window and
press the Run Test button.
Display A – Click on the Diagnostic button.