Ethernet printer troubleshooting procedures, Troubleshooting procedures – HID FARGO HDPii User Guide User Manual

Page 151

Advertising
background image

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4

151

Display C – IP: (third step)

Display D – IP: Address (fourth step)

Ethernet Printer Troubleshooting Procedures

Troubleshooting procedures

If you are having trouble connecting to your Ethernet Printer or printing to it, you should go
through each of the following procedures.

Step Procedure

1

Follow the Verifying the Printer Connection procedure (below).

2

Verify that you are choosing the correct Printer Driver. (Note: The Driver
must match the model of the Printer.)

3

Verify that the port configuration of the PC Printer Driver is set to
communicate to the Printer over the correct IP address.

See Frequently-asked Questions at the end of this section.

Advertising