Adjusting for the resin dither – HID FARGO HDPii User Guide User Manual
Page 191
Advertising
![background image](/manuals/433176/191/background.png)
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
191
Adjusting for the Resin Dither
Select the appropriate dither method according to the type of image to be printed. (Note:
This option only affects those objects printed on the backside of a card with the resin black
panel of a YMCK or YMCKK Print Ribbon. This is only enabled when using at least one K
panel and dual sided enabled, splitting one set of panels.)
Step Procedure
1
Select Optimized for Graphics when printing lower quality images (e.g.,
clipart, logos, etc.) with resin.
OR
Select Optimized for Photo when printing photo quality images with resin.
Advertising