HID FARGO HDPii User Guide - Manual (Page 231)

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
231
Selecting the Print YMC under the K and Print K Only options
Step Procedure
1 Use the Defined Area function.
a. Define another area by clicking on the Defined Area. (Note: Another .2
x .2 (5mm x 5mm) area will appear in the lower left-hand corner. This is
the location in which all newly defined areas will first appear. Up to 5
areas can be defined.)
b. Delete an area by selecting the area and clicking on the Delete button.
(Note: If all areas are deleted, the K panel Resin options will
automatically be deselected.)