Rebooting the printer, Using the reboot pages – HID FARGO HDPii User Guide User Manual
Page 137
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
137
3
Enter the current password in the Root Password Old textbox or leave it
blank if no password has been previously set.
4
Enter the new password in the Root Password New textbox or leave it
blank if you want to remove the old password.
5
Re-enter the new password in the Root Password Confirm textbox or
leave it blank if you want to remove the old password.
6
Select the Submit button.
7
Log in as a root User (using the old password) if you are so prompted.
(Note: Any change of setting will only be accepted after you have
successfully logged in.)
Using the Reboot pages
Rebooting the HDPii restarts the complete Printer, which includes the Print Server.
Rebooting the Printer
The Reboot page allows the HDPii User to reboot or reset the Printer and/or enter the
upgrade mode.
Step Procedure
1
Select the Administration link.
2
Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully
logged in.)
3
Select the Reboot link.
4
Select the Reboot button.
5
Click Yes when prompted.
6
Wait for the Printer to reboot and display the HDPii Home Page.