Konica Minolta bizhub PRESS C8000e - Manual (Page 38)

bizhub PRESS C8000 2-26
2.10 Manually Resetting the Machine: Reset 2
2.10 Manually Resetting the Machine: Reset
When Reset is pressed on the control panel, the machine clears all the copy conditions specified so far and
restores arbitrary settings. This function is called Reset.
Full Auto, Initial, or conditions programed to Mode Memory [30] can be specified as arbitrary settings. Initial
is selected as factory default.
Copy conditions specified as Full Auto
These settings cannot be changed except Output Setting.
-
Color: Full Color
- Original Setting: Normal
- Quality Adjustment: Standard
- Zoom: 1.000
-
Simplex/Duplex: 1->1 (ADF: ON)
-
Application: None
- Output Setting: Selection available in the Utility mode
- Auto Paper: ON
- Image Rotation: ON
Copy conditions specified as Initial
To be specified on the Copy Initial Setting Screen accessed from the Utility Menu Screen
Copy conditions programed to Mode Memory [30]
To be programed by pressing Mode Memory on the control panel
Copy conditions common to the three arbitrary settings
The following settings function in common, irrespective of the selection made from Full Auto, Initial, and con-
ditions programed to Mode Memory [30].
-
Change User: Yes, No
- ADF Original Direction: Reset, Not Reset
- Initial by Key Counter Insert: ON, OFF
- Status Hold When Auto Reset: Keep, Not Keep
- Next Job Staple Setting: Release, Do Not Release
-
Original Set/Bind Direction: Release, Do Not Release
d
Reference
For copy conditions specified as Initial, see page 10-33.
For copy conditions specified as Full Auto or common settings for three arbitrary settings, see page 10-29.
For programing of Mode Memory, see page 8-6.