BNC 1105 Universal Counter - Manual (Page 155)

155 155 155 155
:SYSTem:KEY:LOG?
Queries all the entries in the Key Queue.
Return
Numeric data transferred as ASCII bytes in <NR1> format. A “-1” is returned when
the queue is empty. Each Key Code number is separated by a comma. The entries are
in a last-in, first-out order.
The maximum number of key codes is 500. Each key code has a range of 1 to 10.
Note
The Key Queue will be empties after the counter has been turned off or after a *RST
command.
Save/recall operation does not apply on this value.
:SYSTem:VERSion?
Queries the SCPI version number with which the counter complies.
Return
Numeric data transferred in ASCII bytes in <NR2> format.
The response is in the form of YYYY.V, where YYYY represents the year and V
represents the approved version of that year.
:SYSTem:COMMunicate:RLSTate LOCal | REMote | RWLock
Set or queries the remote/local state of the instrument.
LOCal: Free the all panel keys.
REMote: Set I/O mode to remote and lock all of panel keys, but Preset/Local key not.
RWLock: To lock all of panel keys, instrument can only be controlled via the remote
interface).
SYSTem:BEEPer:STATe OFF | ON
Set or queries the beeper enable mode when an error is generated from the
Front panel or over the remote interface.
:SYSTem:IDNStr <QUOTED STRING>
Set the IDN String for I/O compatible mode. The setting string be queried by *idn? when