BNC 1105 Universal Counter - Manual (Page 68)

68 68 68 68
※ Note: The MODEL 1105’s LAN supports the environments including
Web Server and Java (TM) SE Runtime 6 (Update 1) or up.
To configure LAN interface
1. Press UTILITY button and then the softkey under I/O to select the
I/O menu.
2. Press the softkey under LAN to enter the LAN menu where users can
set up IP addresses and DNS as shown in the Figure 5-4.
Figure 5-4
To set up IP addresses
1. Press the sofykey under IP SETUP to enter the IP address menu.
2. Use the softkey under DHCP to toggle between ON and OFF as
shown in the Figure 5-5.
Figure 5-5
※ Note: The address 192.168.0.248 set as a default is an example for
users’ reference.
IP address, network mask and gateway will be assigned automatically by
the DHCP server at the time of connecting the MODEL 1105 to the
network, if users enable DHCP. On the contrary, if users disable the
DHCP function, then they need to set IP address, network mask and
gateway manually. For more IP address information, users have to
contact local network administrators.
The ways to set up these values are identical. The values are all in IP
address format in form of “n.n.n.n” where n is an integer
between 0 and