BNC 1105 Universal Counter - Manual (Page 36)

36 36 36 36
Figure 4-3 Figure 4-4
Figure 4-5 Figure 4-6
For Voltage Peaks function, the available options are only Input and Volt.
Front panel operation:
1. Select your measurement function by pressing one of the
measurement keys.
2. Press the softkey under STATUS.
3. Keep pressing the softkey to toggle between the options.
4. Continue with the procedure described in Chapter 3 for the
measurement function of your choice.
4.2 Key Functions
The keys and buttons on the MODEL 1105 lead users to their application
purposes. Berkeley Nucleonics Corporation provides two kinds of keys on
the front panel. One is Numeric Keypad and Arrow Keys, and the other
one is the measurement control keys.
4.2.1 Numeric Keypad and the Arrow Keys
There are 12 buttons on the numeric keypad plus four arrow keys,
provided for numeric entry. To enter a numeric value, one may input the
desired value directly on the numeric keypad or use the left/right arrow
keys to move the cursor to the desired digit and the up/down arrow keys
to increase or decrease the value. To finish the entry, press the softkey
under Done or under the desired unit/exponent to set the value. To