Weidmuller ACT20X User Manual
Page 43
Product Installation / Operation, ACT20X-SDI-HDO (Solenoid/Alarm Driver)
1066540000/01/12.11
43
Power Supply
Supply voltage
19.2…31.2 V DC
Max. consumption (2-channels)
≤ 3.5 W
Fuse
1.25 A / 250 V AC
EMC immunity influence
< ±0.5 % of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst
< ±1 % of span
Isolation Voltages (reinforced insulation), Test/Operation
Inputs / outputs / supply
2.6 kV AC / 300 V AC
Output 1 to output 2
1.5 kV AC / 150 V AC
Status relay to supply
1.5 kV AC / 150 V AC
Environmental Specifications
Ambient temperature
-20…+60 °C
Storage temperature
-20…+85 °C
Relative humidity (non-condensation)
< 95 %
Calibration temperature
+20…28 °C
General Specifications
Communications interface,
adapter / configuration software / FDT-DTM
device driver
CBX200 USB / "WI-Manager" / ACT20X DTM
Dimensions (H x W x D)
105.6 x 22.5 x 114.7 mm
Protection degree
IP20
Screw terminal torque
0.5 Nm
Wire size, stranded wire
AWG 26…14 / 0.13…2.08 mm²
Default Settings
Channel 1 function
Direct
Channel 2 function
Direct