Weidmuller ACT20X - Manual (Page 70)

Appendix A. Installation Drawings ACT20X-HDI-SDO (NAMUR Pulse Isolator)
70 1066540000/01/12.11
CBX200 – "WI-Manager" Software
For installation in Zone 2 / Division 2 the following must be observed:
- The CBX200 is an interface cable for configuration via PC.
- Configuration must be performed only in a safe area.
ATEX Certificate KEMA 09ATEX 0168 X
Marking II 3 G Ex nA nC IIC T4
II (1) G [Ex ia] IIC / IIB / IIA
II (1) D [Ex iaD]
Standards EN 60079-0: 2006, EN 60079-11: 2007, EN 60079-15: 2005
EN 60079-26: 2007, EN 61241-0: 2006, EN 61241-11: 2006