Weidmuller ACT20X User Manual
Page 60
Product Installation / Operation, ACT20X-HAI-SAO (HART-transparent Repeater)
60
1066540000/01/12.11
General Specifications
Communications interface,
adapter / configuration software / FDT-DTM
device driver
CBX200 USB / "WI-Manager" / ACT20X DTM
Dimensions (H x W x D)
105.6 x 22.5 x 114.7 mm
Protection degree
IP20
Screw terminal torque
0.5 Nm
Vibration
IEC 60068-2-6, test Fc, 1g, 2…100 Hz
Vibration, continuous
IEC 60068-2-64, test Fh, 1g, 3…100 Hz
Wire size, stranded wire
AWG 26…14 / 0.13…2.08 mm²
EMC immunity influence
≤
0.5 % of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst
≤
1 % of span
Response time for cable fault
< 200 ms
HART Communication
Frequency range
0.5…2.5 kHz
Signal / noise ratio
min. 60 dB (0.5…10 kHz)
Response time (0…90 %, 100…10 %)
< 5 ms
Default Settings
Low/high limit
3.8 mA / 20.5 mA