Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 10)

P-2 About This Manual
The following conventions are used throughout this manual:
• Parameter names are shown in the format Parameter xx - [*]. The xx
represents the parameter number. The * represents the parameter
name. For example Parameter 01 - [Mode].
• Menu commands are shown in bold type face and follow the format
Menu > Command. For example, if you read “Select File > Open,”
you should click the File menu and then click the Open command.
• The firmware release is displayed as FRN X.xxx. The “FRN”
signifies Firmware Release Number. The “X” is the major release
number. The “xxx” is the minor update number.
• RSNetWorx for EtherNet/IP (version 4.01), RSLinx (version 2.40),
and RSLogix5000 (version 11) were used for the screen shots in this
manual. Different versions of the software may differ in appearance
and procedures.
• This manual provides information about the 22-COMM-E EtherNet/
IP adapter and using it with PowerFlex 40 drives. The adapter can be
used with other products that support an internal DSI adapter. Refer to
the documentation for your product for specific information about
how it works with the adapter.
Rockwell Automation, Inc. offers support services worldwide, with over
75 sales/support offices, over 500 authorized distributors, and over 250
authorized systems integrators located through the United States alone.
In addition, Rockwell Automation, Inc. representatives are in every
major country in the world.
Local Product Support
Contact your local Rockwell Automation, Inc. representative for:
• Sales and order support
• Product technical training
• Warranty support
• Support service agreements.
Conventions Used in this Manual
Rockwell Automation Support