Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 159)

Index
A
Access Control parameter, B-5
adapter
adding to an I/O configuration, 4-4
applying power, 2-6
commissioning, 2-1
compatible products, 1-3
components, 1-1
definition, G-1
features, 1-2
grounding, 2-4
illustration, 1-1
installing, 2-1 to 2-6
IP address, 3-3, 3-5
mounting, 2-4 to 2-5
parameters, B-1 to B-5
resetting, 3-11
Single/Multi-Drive mode of
operation, 7-1
specifications, A-1
switches, 1-1
tools to configure, 3-1
troubleshooting, 8-1 to 8-10
web pages, 9-1
applying power to the adapter, 2-6
Assembly object, C-4
attentions, 1-4
B
baud rate, see data rate
bit definitions for Logic Command/
Status word, D-1
BOOTP (Bootstrap Protocol)
definition, G-1
disabling, 3-5
free server application, G-1
using, 3-3
BOOTP parameter, B-1
bridge
adding to an I/O configuration, 4-2
definition, G-1
example, 4-1
C
cables
DSI Internal Interface, 2-4
EtherNet, 2-3
catalog number, 1-1
CIP, G-1
classes of IP addresses, G-5
Comm Flt Action parameter, B-3
commissioning the adapter, 2-1
communications module, see adapter
compatible products, 1-3
components, 1-1
configuration tools, 3-1
connecting adapter to the network,
2-3
ControlFLASH, G-1
controller
definition, G-1
Explicit Messages, 6-4
ControlLogix
example program for Explicit
Messages, 6-5
example program for I/O, 5-3
example program for Multi-Drive
mode, 7-7 to 7-20
formatting Explicit Messages, 6-2
D
data rate
definition, G-2
setting, 3-7