Rockwell Automation 22-COMM-E EtherNet/IP Adapter User Manual
Page 40
Advertising
4-4
Configuring the Scanner or Bridge
To transmit data between the scanner or bridge and the adapter, you must
add the 22-COMM-E adapter as a child device of the scanner or bridge.
1. In the Control Organizer pane, right-click on the scanner or bridge
and select New Module (
Figure 4.6
). In our example, we right-click
on the 1756-ENBT/A bridge.
Figure 4.6 Right-Clicking on the Scanner
The Select Module Type dialog box (
Figure 4.7
) appears.
Figure 4.7 Select Module Type Dialog Box
2. Select ETHERNET-MODULE to configure a 22-COMM-E
(
Figure 4.7
), and then click OK.
Adding the Adapter and Drive to the I/O Configuration
Advertising