Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 103)

Viewing the Adapter’s Web Pages 9-11
2. Click Save changes.
Important: It is recommended that Parameter 30 - [Web
Features] Proc Dsp Cfg Bit 1 value be set to “0”
(Disabled) after configuration. Otherwise the
configuration can be changed anytime the web page is
accessed with a browser.
DSI device information pages show a device’s module information,
diagnostic information, and fault queue.
Figure 9.8 shows a module
information example page for the Port 0 device (host). Figure 9.9 and
Figure 9.10 respectively show diagnostic information and fault queue
example pages for the Port 5 device (22-COMM-E adapter).
Figure 9.8 Example of Port 0 (PowerFlex 40 Drive) Module Information Page
DSI Device Information Pages
Information Description
Product text Text identifying the device
Vendor ID 1 = Allen-Bradley
Device type 127
Product code Code for the product name and its rating
Revision Firmware revision used by the device
Serial number Serial number of the device
Status Operating status of the device (for example, faulted)