Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 107)

Appendix
B
Adapter Parameters
Appendix B provides information about the EtherNet/IP adapter
parameters.
The parameters in the adapter are numbered consecutively. However,
depending on which configuration tool you use, they may have different
numbers.
Topic Page
About Parameter Numbers B-1
Parameter List B-1
About Parameter Numbers
Configuration Tool Numbering Scheme
• DriveExplorer
• DriveExecutive
• HIM
The adapter parameters begin with parameter 1. For
example, Parameter 01 - [Mode] is parameter 1 as
indicated by this manual.
• Explicit Messaging
• RSNetWorx for EtherNet/IP
Refer to Chapter 6 , Using Explicit Messaging , and
Appendix C , EtherNet/IP Objects , for details.
Parameter List
Parameter
No. Name and Description
Details
01 [Mode]
Displays the Single or Multi-Drive operating mode
selected with the Operating Mode Switch (SW1)
on the adapter. Default: 0 = Single Drive
Values: 0 = Single Drive
1 = Multiple Drive
Type: Read Only
02 [BOOTP]
Configures the adapter to use BOOTP so that you
can set its IP address, subnet mask, and gateway
address with a BOOTP server. Default: 1 = Enabled
Values: 0 = Disabled
1 = Enabled
Type: Read/Write
Reset Required: Yes