Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 13)

Chapter
1
Getting Started
The 22-COMM-E EtherNet/IP adapter is a communication option
intended for installation into a PowerFlex 40 drive. It can also be used
with other Allen-Bradley products that support an internal DSI adapter.
The Multi-Drive feature (
Chapter 7 ) also provides a means for
PowerFlex 4 drives and other DSI Hosts to connect to EtherNet/IP.
Figure 1.1 Components of the Adapter
Topic Page Topic Page
Components 1-1 Safety Precautions 1-4
Features 1-2 Quick Start 1-5
Compatible Products 1-3 Modes of Operation 1-6
Required Equipment 1-3
Components
Item Part Description
➊
Status
Indicators Four LEDs that indicate the status of the Ethernet connection,
DSI, and the adapter. Refer to
Chapter 8 , Troubleshooting .
➋
DSI Connector A 20-pin, single-row shrouded male header. An Internal Interface
cable is connected to this connector and a connector on the drive.
➌
Ethernet
Connector An RJ-45 connector for the Ethernet cable. The connector is
CAT-5 compliant to ensure reliable data transfer on 100Base-TX
Ethernet connections.
➍
Operating Mode
Switch and Web
Pages Switch Selects Single or Multi-Drive mode of operation, and enables or
disables the adapter web pages. Refer to
Chapter 2 , Setting
Operating Mode and Web Pages Switches .
➊
➌
➋
➍
LEDs are on bottom side of adapter board