Rockwell Automation 22-COMM-E EtherNet/IP Adapter - Manual (Page 108)

B-2 Adapter Parameters
03
04
05
06 [IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
Sets the bytes in the IP address.
Important: To set the IP address using these
parameters, Parameter 02 - [BOOTP] must be set
to Disabled.
Default: 0
Default: 0
Default: 0
Default: 0
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
07
08
09
10 [Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
Sets the bytes of the subnet mask.
Important: To set the subnet mask using these
parameters, Parameter 02 - [BOOTP] must be set
to Disabled.
Default: 0
Default: 0
Default: 0
Default: 0
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
11
12
13
14 [Gateway Cfg 1]
[Gateway Cfg 2]
[Gateway Cfg 3]
[Gateway Cfg 4]
Sets the bytes of the gateway address.
Important: To set the gateway address using
these parameters, Parameter 02 - [BOOTP] must
be set to Disabled.
Default: 0
Default: 0
Default: 0
Default: 0
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
Parameter
No. Name and Description
Details
255 . 255 . 255 . 255
[IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
255 . 255 . 255 . 255
[Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
255 . 255 . 255 . 255
[Gateway Cfg 1]
[Gateway Cfg 2]
[Gateway Cfg 3]
[Gateway Cfg 4]