Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 130)

7–9 Creating Messages
Publication 2706-817
The dialog displays the destination message number and the text
string copied in the Windows clipboard.
5. Select one of these options:
Option: Message Text:
Embedded
Variables:
Attributes:
Text Only Copied n/a n/a
Text with Embedded
Variables
Copied Copied n/a
Attributes Only n/a n/a Copied
All Copied Copied Copied
6. Select OK to implement the choice.
Replacing a text string in a message or messages
1. Press CTRL + H to bring up the Replace dialog.
Or select Replace in the Edit menu.
2. Enter the Find Text string and the Replace Text string.
Find Text and Replace Text can not include graphics or
variables. However they may have spaces and punctuation.
3. Select the Match Case check box if capitalization is important in
the Find Text string.
4. Select one of the Search radio buttons to choose whether the
search should go up or down through the Message List.
5. Select Find Next and then for each message found, decide
whether to replace the text string.
Or select Replace All and the text string is replaced automatically
in every message where it occurs.