Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 192)

8–15 Working with Tags
Publication 2706-817
To set up the page:
1. Select the Page Setup button in the Print dialog to open the Page
Setup dialog.
Or choose Page Setup from the Project menu.
2. Enter a number to specify each page Margin (Top, Bottom, Left,
Right). Default is 0.5” for each margin.
3. Select the Show Gridlines box if the Table View gridlines should
be printed.
4. Select the box, Use Maximum Width for Each Column, if each
field should be the maximum width allowed for it.
Deselect the box if the printed output should be based on the
contents of the columns. The number of characters that fit in a
column may be different from the printed output depending on
the fonts available.
5. Set up Header Lines 1 and 2 as required. Each line can be up to
255 characters long. See Header shortcuts below.
6. Select OK, then select OK in the Print dialog.