Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 39)

3–9 MessageBuilder Basics
Publication 2706-817
Standard and Message Edit toolbars
Two toolbars are located at the top of the application window. Tools
provide easy access to commonly used commands. Instead of
opening a menu and choosing a command, simply click a tool to
carry out an action. Some tools complete the action immediately;
others open a dialog or a menu for further input.
Note: Tools on a toolbar can be accessed only with a mouse. All
toolbar commands are available on one of the menus or in the
Applications area.
Standard Toolbar
Message Edit Toolbar
Message Edit Box
To identify a tool, move the cursor arrow to the tool. Press and hold
the left mouse button while watching the status bar.
•
If the tool is correct, release the mouse button.
•
If the tool is not correct, move the cursor off the icon before
releasing the mouse button.
Note: Appendix B lists all the available tools and briefly explains
what each one does.
To toggle the Standard Toolbar on and off:
1. Choose View from the menu bar.
2. Choose Toolbar from the View menu.
A check mark ( n ) appears next to the Toolbar command when it is
active. To disable the Toolbar command, choose the command again.
Note: The Message Edit toolbar cannot be turned off.