Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 199)

8–22 Working with Tags
Publication 2706-817
Interpreting Import/Export error messages 75
This error: Means that: What to do:
device error - no
device specified
a device has not been specified Select OK, then select or enter a device.
device error -
device does not
exist
the specified device has not been defined
Select No to select or enter another device.
Select Yes to create a new device. This dialog box opens:
1. Select the type of device.
2. Enter the device address.
3. Select OK.
device error -
device not an SLC
processor
1
a file imported from APS format requires an
SLC processor, which was not defined
Select OK, then select an SLC device.
parse error 1
the selected source file was:
•
corrupted
•
unsupported type, or a type other than
the type selected
•
manually edited, with
uncorrected mistakes
Select OK to abort the Tag Import/Export utility.
Fix the bad file if necessary. Choose Import from the Tools menu again and
select the same or another file to be imported.
file error - the file
does not exist
1
the selected source file does not exist Select OK. Select another source file or cancel.
file error - the file
already exists
2
the selected destination file is already in
the project Select Yes to replace the file with the imported file.
Select No to cancel the import.
project error the selected project does not exist Select OK. Select another project or cancel.
1 Import only
2 Export only