Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 297)

Upload/Download Error Messages E–2
Publication 2706-817
Error Message What to do Meaning
Error while scanning for data file CRC.
The historical event data file could not be
read to verify its data. Retry the historical event stack upload
operation.
INTERCHANGE command failure. Remote
station did not acknowledge command.
MessageBuilder software aborted the transfer
because it did not receive a response to a
command. Verify that the MessageView terminal is
connected to the computer and startup self
tests are normal. Retry operation.
RNA: Error $COOA placing device #n online
INTERCHANGE could not start the driver
associated with port #n of the computer.
Check the driver configuration in CFG-KT.INI.
It may be set for a different baud rate than the
physical network.
Terminal Aborted File Transfer: File is NOT
compatible with terminal.
The type of MessageView application file that
is being downloaded is not compatible with
the selected terminal device.
Generate a new application file specifying the
correct terminal type.
Terminal Aborted File Transfer: File is too
large for terminal. The application file that is being downloaded
will not fit in the terminal’s memory.
Reduce the size of the application.
Terminal Aborted File Transfer: Terminal has
no file available. An upload attempt failed because the terminal
did not have an application loaded in memory.
Download an application to the terminal.
Terminal has no file available.
The requested file for upload does not exist.
This typically occurs when the HE Stack is
empty, that is, it is cleared.
Do not attempt to upload an empty HE Stack
file.
Note: CRC is Cyclic Redundancy Check, a check for errors in files.